I finally decided to settle on using Molicare Super Plus after fiddling with clamps, catheters, and many different types of diapers for the last year. The reason I chose them is because I found that their quality assurance at the factory is so good that I don't need to worry about defects, and the wick so well that I don't need to wear additional protection in the form of plastic pants.
I'm having a small problem though, I have a 39 inch waist and wear the size large, and after the diaper "settles", the padding in the front flips to the outside. What I mean is that a 1/8 of an inch by 1.5 inch portion of the absorbent padding flips onto the outside for some reason, and phrases against my pants. After I have an accident, my pants will wick the urine , and I will have a small urine spot, roughly the size of an oval shaped half dollar.
Has anyone ever had this issue before? This is really my only grip with molicare (the diaper sometimes bites into my legs as well if I tape it on too tight, but I guess that is my fault). I fasten the bottom tapes straight accross, half on just the plastic before the absorbent material, and half on the plastic after the absorbers material extends into the side.
|